JAZ Knotted Control Brushes incorporate a rigid degradable material which holds the wire preventing its opening.
Measures
| Item | Wire | Brushing | Diameter (d) | Trim Length (s) | Thread | R.P.M. | |||
|---|---|---|---|---|---|---|---|---|---|
| mm | " | mm | " | Rec. | Max. | ||||
| CCT 0801L | Knotted | Heavy Removal | 80 | 3.1/4" | 30 | 1.3/16" | M10-M14 W5/8" 5/8" UNC, Multi R (1) | 6.000 | 8.500 |
| CCT 1251L | Knotted | Heavy Removal | 125 | 5" | 30 | 1.3/16" | 6.000 | 6.500 | |
(1) Exclusive design for M14 x 2 and W 5/8" - 11 (Code R88) or for M10 x 1,25 and M10 x 1,50 (Code R77).
Technical Specifications
Finishing grade
| Ø Wire | Finishing | Grade |
|---|---|---|
| 0,8-0,6-0,5 | Coarse | W1 |
| 0,4-0,37-0,35-0,30 | Medium | W2 |
| 0,20-0,15-0,12-0,10 | Fine | W3 |
| 0,08-0,06 | S. Fine | W4 |
| Non-Abrasive Fibers | Neutral | SW5 |
Removal rate
| Ø Wire | |
|---|---|
| 0,8-0,6-0,5 |
|
| 0,4-0,37-0,35-0,30 |
|
| 0,20-0,15-0,12-0,10 |
|
| 0,08-0,06 |
|
Flexibility
| DLZ, FLAP, Encapsulated brushes |
|
| Twist knots, Control brushes |
|
| Crimped wire .020 to .012 |
|
| Crimped wire .010 to .004 |
|
| Crimpe wire .003 to .002 Nylon & synthetic fibers |
|
Additional information
Control and Ergonomics over the brushing
The new JAZ Control Brushes incorporate a rigid degradable material which holds the wire preventing its opening and getting by that a much better control of the brushing surface and a higher level of ergonomics over the work.
Total Safety
These new JAZ wire brushes avoid wire breakage therefore they offer an outstanding safety improvement over the brushing work. They also provide for a more friendly handling of the brush, protecting end users against potential pricking caused by the wire.
Higher Performance
The new JAZ Control Brushes provide an excellent performance improvement comparing to the traditional wire brushes due to the avoidance of wire breakage and the resulting extension of the working life of the wires.
